Dr. Dipak Kumar Mandal

Associate Professor

Dr. Dipak Kumar Mandal joined the Institute in 11/May/2004

Born on : 03/Jan/1969

Contact Information

Office Phone No.: 1440

Personal Phone No.: 9434988752

Email: dkm@cemk.ac.in,dipkuma@yahoo.com

Quarter No: C-41/3

Educational Qualification

 Ph.D (Engg) from  Bengal Engg. & Science University, Shibpur in  ME in the year of 2010

 M.E (Mechanical) from  Bengal Engineering College (Deemed University) in  ME in the year of 1999 with   1st Class.

Industry & Professional Experience

 Special operating assistant, Grade-A ,  West Bengal Power Development Corporation Limited ,  from 11.10.1994 to 04.11.2004.

Books Published

 Fluid Mechanics and Hydraulic Machines by  D K Mandal, N K Manna, S Chakraborti, N C Chatterjee , Vikash Publishing House PVT Ltd , 978-93259-8421-9 in  2015.

Research Paper published in International Journal

Effect of Restriction and Reynolds Number on the Pressure of Blood of a Stenotic Artery by  D. K. Mandal and S. Chakrabarti ,  International Journal for Fluid Mechanics Research in  2007, Volume 34(2),

Effect owo Dimensional Simulation of Steady Blood Flow through a Stenosed Coronary Artery by  D. K. Mandal and S. Chakrabarti ,  International Journal of Dynamics of Fluids (IJDF) in  2007, Volume 3(2)

“Study of Pressure Drop and Flow Characteristics across Rectangular Stenotic Models” by  D. K. Mandal and S. Chakrabarti ,  International Journal for Fluid Mechanics Research in  2007, Volume 34(5),

“Effect of Stricture Length on Reattachment Point and Wall Shear Stress through a Stenosed Coronary Artery” by  D. K. Mandal and S. Chakrabarti ,  International Journal for Fluid Mechanics Research in  2008, Volume 35(2),

“Numerical Study of Blood Flow through a Double Bell Shaped Stenosed Coronary Artery” by  D. K. Mandal and S. Chakrabarti ,  Journal of Energy Heat and Mass Transfer in  2009, Volume 31,

“Effect of Stenosis Length on Flow Characteristics across Rectangular Stenotic Models” by  D. K. Mandal and S. Chakrabarti ,  International Journal of Fluid Mechanics in  2009, Volume 1(1),

“Study on the effect of Different Shaped Stenoses on Blood flow through Coronary Artery” by  D. K. Mandal and S. Chakrabarti ,  Intl. Journal of Biomedical Engg. and Technology in  2010, Volume 4(1)

“Numerical Simulation of the Performance of a Sudden Expansion with Fence as a Diffuser in Low Reynolds Number Regime” by  S. Chakrabarti, S. Rao and D. K. Mandal, ,  ASME Journal of Engineering for Gas Turbines and Power in  2010, Vol:132(11)

“Numerical Study of Blood Flow Through Different Double Bell Shaped Stenosed Coronary Artery During the Progression of the Disease, Atherosclerosis” by  D. K. Mandal, N. K. Manna and S. Chakrabarti ,  International Journal of Numerical Methods for Heat and Fluid Flow in  2010, Vol 20(6),

“Influence of Primary Stenosis on Secondary One and Vice Versa in case of Double Stenoses” by  D. K. Mandal, N. K. Manna and S. Chakrabarti, ,  Journal of Applied Fluid Mechanics in  2011, Vol 4 (4)

“A numerical model study of steady flow through bell-shaped stenoses with and without asymmetry” by  D. K. Mandal, N. K. Manna and S. Chakrabarti ,  International Journal of Experimental and Computational Biomechanics in  2010, Vol. 1(3)

Influence of Different Bell Shaped Stenoses on the Progression of the Disease, Atherosclerosis by  D. K. Mandal, N. K. Manna and S. Chakrabarti ,  The Journal of Mechanical Science and Technology, Springer in  2011, Volume. 25(8)

“A Numerical Study on the Performance of a Sudden Expansion with Multisteps as a Diffuser” by  D. K. Mandal, N. K. Manna, S. Bandyopadhyay, B.P.Biswas and S. Chakrabarti ,  International Journal of Applied Mechanics in  2011, Volume 3(4)

“A numerical study on the flow through a plane symmetric sudden expansion with a fence viewed as a diffuser” by  D. K. Mandal, S. Bandyopadhyay, and S. Chakrabarti ,  International Journal of Engineering, Science and Technology in   2011, Volume 3(8)

Study on the Effect of Steady, Simple pulsatile and Physiological Pulsatile Flows Through A Stenosed Artery by  P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti ,  Heat and and Mas Transfer, Springer in  2014, Vol 50

Mass deposition and fluid flow in stenotic arteries: Rectangular and Half-circular models by  D. K. Mandal and S. Chakrabarti ,  Journal of Biomedical Science and Engineering(JBiSE) in  Vol.6 No.12 2013

A numerical investigation of fluid flow through a sudden expansion by  S. Kumar, S. Chakrabarti, D. K. Mandal and S Majumdar ,  Journal of Energy Heat and Mass Transfer in  2014,Volume 36

Wall Shear Stress Characteristics for the Progression of the Disease, Atherosclerosis by  P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti ,  J. Inst. Eng. India Ser. C in  2015, Vol 96(3)

Analysis of Steady and Physiological Pulsatile Flow Characteristics in an Artery with Various Percentages of Restrictions by  P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti ,  International Journal for Fluid Mechanics Research in  2015 Vol 42 (3)

Effects of Hemodynamic Parameters and involved Processes on Mass Transport through Arterial Wall for Localization and Progression of the Disease, Atherosclerosis: A Review by  Somnath Santra, Dipak Kr Mandal and Somnath Chakrabarti ,  International Journal of Transport Phenomena in  2016, Volume 14, Number 3

Numerical investigation of heat transfer under Impinging annular jets by  Tarun Kanti Pal, Himadri Chattopadhyay, Dipak Kumar Mandal and Suvanjan Bhattacharyya ,  Matter:International Journal of Science and Technology in  2016, Volume 2 Issue 1

ANALYSIS OF WALL SHEAR PARAMETERS OF PHYSIOLOGICAL PULSATILE FLOW THROUGH MILD AND SEVERE ARTERIAL STENOSIS AND CORRELATION TO ATHEROSCLEROSIS by  P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti ,  MATTER: International Journal of Science and Technology in  2016, Volume 2 Issue 3,

Effect of Hypertension and Hyperlipidemia on LDL Transport in Arterial Layers for Newtonian and non-Newtonian Aspects of Blood by  Somnath Santra, Dipak Kumar Mandal and Somnath Chakrabarti ,  International Journal of Transport Phenomena in  Volume 14, Number 4 2017

Assessment of Accumulation Rate of LDL Species in Arterial Wall layers under Hypertension and Hyperlipidemia Conditions by  Somnath Santra, Dipak Mandal and Somnath Chakrabarti ,  International Journal for Fluid Mechanics Research in  2017,Volume 44(1)

Wall Shear Stress Characteristics for the Progression of the Disease, Atherosclerosis by  P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti ,  J. Inst. Eng. India Ser. C in  2015, Vol 96(3)

Research Paper published in International Conferences

Study on Flow Characteristics of Fluid passing through a Configuration of Plain Sudden Expansion Followed by Diverging Section–Viewed as a Diffuser from  A. Guha, D.K. Mandal, N.K. Manna and S. Chakrabarti  2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in  2-4th Jan 2015

Computational Study of Heat Transfer under Impinging Annular Jets from  Tarun Kanti Pal, Himadri Chattopadhyay and Dipak Kumar Mandal  2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in  2-4th Jan 2015

Fluid Dynamics Study of Physiological Pulsatile Flow through Stenosed Artery from  P. Goswami, D.K. Mandal, N.K. Mann and S. Chakrabarti  2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in  2-4th Jan 2015

Mathematical Modelling of Mass Transport through Arterial Wall on the Perspective of the Disease, Atherosclerosis: A Review from  S. Santra, D.K. Mandal and S. Chakrabarti  2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in  2-4th Jan 2015

Study on Flow Characteristics of Fluid passing through a Configuration of Plain Sudden Expansion Followed by Diverging Section–Viewed as a Diffuser from  A. Guha, D.K. Mandal, N.K. Manna and S. Chakrabarti  2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in  2010, Vol 20(6),

Computational Study of Heat Transfer under Impinging Annular Jets from  Tarun Kanti Pal, Himadri Chattopadhyay and Dipak Kumar Mandal  2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015)

Fluid Dynamics Study of Physiological Pulsatile Flow through Stenosed Artery from  P. Goswami, D.K. Mandal, N.K. Mann and S. Chakrabarti  2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015)

Mathematical Modelling of Mass Transport through Arterial Wall on the Perspective of the Disease, Atherosclerosis: A Review from  S. Santra, D.K. Mandal and S. Chakrabarti  2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015)

Design and Development of a Low Cost Automation Injection Molding Machine of 250 g Capacity Using Microcontroller from  Soumya Kanti Manna, Saibal Kumar Pradhan and Dipak Kumar Mandal  28th International Conference on CADCAM, Robotics and Factories of the Future 2016 (CARs & FoF 2016)

Transport phenomena under impinging annular jets from  Tarun Kanti Pal, Himadri Chattopadhyay, Dipak Kumar Mandal  5th International and 41st National Conference on Fluid Mechanics and Fluid Power (FMFP – 2014)

Analysis of Wall Shear Parameters of Physiological Pulsatile Flow through Mild and Severe Arterial Stenosis and Correlation to Atherosclerosis from  Partha Goswami, Dipak Kumar Mandal, Nirmal Kumar Manna, Somnath Chakrabarty.  3rd International Conference on Researches in Science and Technology (ICRST), at Nanyang Technological University, Nanyang Executive Centre, Singapore.

Numerical Investigation of Heat Transfer under Impinging Annular Jets from  Tarun Kanti Pal, Himadri Chattopadhyay, Dipak Kumar Mandal and Suvanjan Bhattacharyya,  3rd International Conference on Researches in Science and Technology (ICRST), at Nanyang Technological University, Nanyang Executive Centre, Singapore.

A numerical study on the variation of static pressures of blood near the stenosis of coronary artery from  S. Chakrabarti, D. Mondal and D. K. Mandal  International Conference on Mechanical Engineering 2005(ICME2005), Dhaka, Bangladesh in  28-30 December 2005

Study on the impact of percentage of stenosis on wall pressure in a stenotic coronary artery from  D. K. Mandal and S. Chakrabarti  2nd International Conference “From Scientific Computing to Computational Engineering, Athens Bangladesh in  5-8 July, 2006

Study on the variation of wall pressure of blood near the stenosis of a coronary artery from  D. K. Mandal and S. Chakrabarti  2nd International Congress on Computational Mechanics and Simulation (ICCMS-06), IIT Guwahati in  8-10 December 2006

Effect of different shaped stenoses on wall pressure drop at stenosis zone of a coronary from  D. K. Mandal and S. Chakrabarti  fifty-third congress of The Indian Society of Theoretical and Applied Mechanics (An international Meet) held in University College of Engg., Osmania University, Hyderabad, in  27-30 December 2008

Study of wall shear stress through a coronary artery with a trapezoidal shaped stenosis from  S. Chakrabarti and D. K. Mandal  fifty-third congress of The Indian Society of Theoretical and Applied Mechanics (An international Meet) held in University College of Engg., Osmania University, Hyderabad, in  27-30 December 2008

Study of wall shear stress through asymmetric double stenosed coronary artery from  S. Chakrabarti and D. K. Mandal  International Conference on Advances in Mechanical Engineering, (ICAME-2009), Surat, in  August 3-5, 2009

A numerical study on wall shear stress and flow characteristics of blood flowing through coronary artery diseased with single asymmetric stenosis from  S. Chakrabarti, D. K. Mandal and N. K. Manna  International Conference on ‘Frontiers in Mechanical Engineering, FIME2010, National Institute of Technology Karnataka, Surathkal in  May, 20-22, 2010

Numerical prediction of blood flow through asymmetric multistenosed artery from  D. K. Mandal, N. K. Manna and S. Chakrabarti  5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics IIT Kharagpur, India in  December 27-29, 2010,

Numerical prediction of blood flow through asymmetric multistenosed artery from  D. K. Mandal, N. K. Manna and S. Chakrabarti  5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics IIT Kharagpur, India in  December 27-29, 2010,

A numerical study on the effect of location of fence in a sudden expansion on its performance as a diffuser from  S. Chakrabarti, D. K. Mandal and S. Rao  5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics IIT Kharagpur, India in  December 27-29, 2010

A Numerical Model Study of Steady and Pulsatile Flow through Symmetrical and Asymmetrical Bell Shaped Stenoses from  D. K. Mandal, N. K. Manna and S. Chakrabarti  International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011), SKP Engineering College, Tiruvannamalai-606 611 in  December, 16-17,2011

A numerical study on the effect of suction on the performance of a Vortex Controlled Diffuser from  S. Bandyopadhyay, D. K. Mandal and S. Chakrabarty  International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011), SKP Engineering College, Tiruvannamalai-606 611, SKP Engineering College, Tiruvannamalai-606 611 in  December, 16-17,2011

A Numerical Experimentation On The Performance Of A Sudden Expansion With Two Fences In Terms Of Static Pressure Rise When Viewed As A Diffuser from  N. Banerjee, D.K Mandal and S. Chakrabarti  International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011), SKP Engineering College, Tiruvannamalai-606 611 in  December, 16-17,2011

Study on the Performance of a Condenser used in a 210MW Thermal Power Unit from  A. Dutta ,D. K. Mandal ,A. K. Das and S. Chakrabarti  International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011), SKP Engineering College, Tiruvannamalai-606 611 in  December, 16-17,2011

Study on the variation of effectiveness, effective length of diffuser and stagnation pressure, with the configuration of a sudden expansion with two fences from  S. Chakrabarti, D.K Mandal and N. Banerjee  International Conference on Mechanical Engineering 2011 (ICME2011), Dhaka, Bangladesh in  18-20 December 2011,

Comparison of Steady, Simple pulsatile and Physiological Pulsatile Flow through Stenosed Artery from  P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti  International conference on Advances in Mechanical Engineering and its Interdisciplinary areas, CEMK, 2012 in  27-28 th December 2012.

Study on shear flow charecteristics in a stenosed human artery For initiation and progression of atherosclerosis from  P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti  22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference 2013, organized by IIT Kharagpur, India in  28-31st December 2013

Study on shear flow charecteristics in a stenosed human artery for initiation and progression of atherosclerosis from  P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti  58th Congress of ISTAM BESU, Kolkata, India. in  18th - 21st December, 2013

Study on flow characteristics of fluid passing through hybrid Diffuser with the help of streamline contours from  A. Guha, D. K. Mandal, N. K. Manna and S. Chakrabarti  58th Congress of ISTAM BESU, Kolkata, India. in  18th - 21st December, 2013

Sponsored Project

Project Title:  Modelling of mass transport through arterial wall during initiation and progression of stenosis
Sponsor:  AICTE
Investigator (s): Co-principal investigator
Amount: Rs 5,39000/-
Duration: from 2010 to 2011
.

Project Title:  Study of VCR engine performance for both Diesel and Petrol Engine.
Sponsor:  AICTE, MODROBS
Investigator (s): AICTE, MODROBS
Amount: Rs.1163375/-
Duration: from 2013 to 2014
.

Project Title:  DEVELOPMENT OF STUDENT SATELLITE TECHNOLOGY FOR AERIAL SURVEILLANCE Sponsor:  Institution of Engineers( India) Investigator (s): D K ManadalAmount: 50000Duration: 2014.

Project Title:  CAE SOLUTIONS TO STITCH 3D LINEAR SCANS INTO WHOLE OBJECTS FOR MOULD MAKING Sponsor:  Institution of Engineers( India) Investigator (s): D K ManadalAmount: 30000Duration: 2015-16.

Project Title:  CNC SOLUTIONS TO MAKE EVAPORATIBE THERMCOL PATTERNS Sponsor:  Institution of Engineers( India) Investigator (s): D K ManadalAmount: 40000Duration: 2015-16.

Project Title:  Indigenous clamp for medical and research lab applications Sponsor:  Institution of Engineers( India) Investigator (s): Dr. Dipak Kumar MandalAmount: 50000Duration: April 2016, 6 months.

FDP/Seminar/Workshop/Conferences Organized

 National Workshop on Basics of Computational Fluid Dynamics Organized by  D K Mandalsponsored by  Jointly sponsored by AICTE & DST during  11-13.1.2008.

 National Workshop on CFD and it’s application in Bio-Fluid Dynamics (NWCBFD’12) Organized by  D K Mandalsponsored by  Jointly sponsored by AICTE, DST & DBT during  02.-04-01.2012.

 International conference on Advances in Mechanical Engineering and its Interdisciplinary areas(ICAMEI2012) Organized by  D K mandalsponsored by  sponsored by DBT &AICTE during  27-28.12.12.

 Faculty Development Programme” for research and Develpoement Organized by  D K Mandalsponsored by  under TEQIP-II during  02.02.2013.

 Invited talk on on Thermodynamics and its applications Organized by  D K Mandalsponsored by  under TEQIP-II during  13-14.04.13.

 Workshop on Outcome Based Education Organized by  D K Mandalsponsored by  under TEQIP-II during  21st May 2013.

 Workshop on Aeromodelling and hands on Training Organized by  D K Mandalsponsored by  under TEQIP-II during  15-17.09.2013.

 MATLAB Orientation programme Organized by  D K Mandalsponsored by  under TEQIP-II during  8-14.09.2013.

 International workshop on Advances in Healthcare Engineering (IWAHE-14) Organized by  D K Mandalsponsored by  TEQIP-II and DBT during  2-4.1.2014.

 2nd International conference on Advances in Mechanical Engineering and its Interdisciplinary areas(ICAMEI15) Organized by  D K Mandalsponsored by  DBT during  2-4.1.2015.

 28th International Conference on CADCAM, Robotics and Factories of the Future 2016 (CARs & FoF 2016) Organized by  D K Mandalsponsored by  BRNS, SERB, RSI, IEI, GATEforum, TEQIP-II during  4-6.1.2016.

 International Workshop on Thermo-Fluids Sciences : Analysis and applications Organized by  D K Mandalsponsored by  TEQIP-II, IEI(I) during  1-3.10.2016.

Summer/Winter Attended

1.1.07

 

21.1.07

JadavpurUniversity

AcademicStaffCollege, UGC

Refresher course  entitled “Special Topics in Fluid Mechanics”

<td valign=&quot

8.6.09

27.6.09

JadavpurUniversity

AcademicStaffCollege, UGC

Refresher course entitled “Frontiers in Power Engineering and Energy Sustainability”

29.12.09

31.12.09

IIT

Interaction with Professional Bodies

IIT Kharagpur,IIEST, Shibpur,JUKolkata,IIT Roorkee,IIT Guwahati,IIT Kanpur,IIT Madras ,IIt Delhi,IIT Bombay,IIT Bhubaneswar,IISC Bangalore,BARC Mumbai,NIOH Kolkata,University of Pune,CMERI, Durgapur,NUS, Singapore,Cleveland State University, USA,Cranfied University, UK,University of Southampton,Massachusetts Institute of Technology,Texas  A & m university,University of Florida,Northan Illunois University,Middlesex University, UK,Colombia and South Bank University, UK,Universitiy of West Indies,University of Bradford, UK

Subject taken at Undergraduate Level

Engineering Mechanics, Engineering Graphics,Workshop, Engineering thermodynamics and Fluid Mechanics, Fluid Mechanics and Fluid Machines, Heat Transfer, Power Plant Engineering

Area of Specializations/Research Areas

Thermal Power Engineering, Computational Fluid Mechanics

MAJOR RECRUITERS