Logout
Mechanical Engineering
Dr. Dipak Kumar Mandal
Associate Professor, Mechanical Engineering
Dr. Dipak Kumar Mandal joined the Institute in 11/05/2004
Born on : 03/01/1969
Office Phone No.: 1440/1518
Personal Phone No.: 9434988752
Quarter No: C-41/3
Ph.D (Engg) from Bengal Engg. & Science University, Shibpur in ME in the year of 2010
M.E (Mechanical) from Bengal Engineering College (Deemed University) in ME in the year of 1999 with 1st Class.
Special operating assistant, Grade-A , West Bengal Power Development Corporation Limited , from 11.10.1994 to 04.11.2004.
Fluid Mechanics and Hydraulic Machines by D K Mandal, N K Manna, S Chakraborti, N C Chatterjee , Vikash Publishing House PVT Ltd , 978-93259-8421-9 in 2014.
Power Plant Engineering: Theory and Practice by D K Mandal, S Chakrabarti, Arup Kr Das, P K Das , WILEY , 9788126579754, 9788126579754 in 2019.
Effect of Restriction and Reynolds Number on the Pressure of Blood of a Stenotic Artery by D. K. Mandal and S. Chakrabarti , International Journal for Fluid Mechanics Research in 2007, Volume 34(2),
Effect owo Dimensional Simulation of Steady Blood Flow through a Stenosed Coronary Artery by D. K. Mandal and S. Chakrabarti , International Journal of Dynamics of Fluids (IJDF) in 2007, Volume 3(2)
“Study of Pressure Drop and Flow Characteristics across Rectangular Stenotic Models” by D. K. Mandal and S. Chakrabarti , International Journal for Fluid Mechanics Research in 2007, Volume 34(5),
“Effect of Stricture Length on Reattachment Point and Wall Shear Stress through a Stenosed Coronary Artery” by D. K. Mandal and S. Chakrabarti , International Journal for Fluid Mechanics Research in 2008, Volume 35(2),
“Numerical Study of Blood Flow through a Double Bell Shaped Stenosed Coronary Artery” by D. K. Mandal and S. Chakrabarti , Journal of Energy Heat and Mass Transfer in 2009, Volume 31,
“Effect of Stenosis Length on Flow Characteristics across Rectangular Stenotic Models” by D. K. Mandal and S. Chakrabarti , International Journal of Fluid Mechanics in 2009, Volume 1(1),
“Study on the effect of Different Shaped Stenoses on Blood flow through Coronary Artery” by D. K. Mandal and S. Chakrabarti , Intl. Journal of Biomedical Engg. and Technology in 2010, Volume 4(1)
“Numerical Simulation of the Performance of a Sudden Expansion with Fence as a Diffuser in Low Reynolds Number Regime” by S. Chakrabarti, S. Rao and D. K. Mandal, , ASME Journal of Engineering for Gas Turbines and Power in 2010, Vol:132(11)
“Numerical Study of Blood Flow Through Different Double Bell Shaped Stenosed Coronary Artery During the Progression of the Disease, Atherosclerosis” by D. K. Mandal, N. K. Manna and S. Chakrabarti , International Journal of Numerical Methods for Heat and Fluid Flow in 2010, Vol 20(6),
“Influence of Primary Stenosis on Secondary One and Vice Versa in case of Double Stenoses” by D. K. Mandal, N. K. Manna and S. Chakrabarti, , Journal of Applied Fluid Mechanics in 2011, Vol 4 (4)
“A numerical model study of steady flow through bell-shaped stenoses with and without asymmetry” by D. K. Mandal, N. K. Manna and S. Chakrabarti , International Journal of Experimental and Computational Biomechanics in 2010, Vol. 1(3)
Influence of Different Bell Shaped Stenoses on the Progression of the Disease, Atherosclerosis by D. K. Mandal, N. K. Manna and S. Chakrabarti , The Journal of Mechanical Science and Technology, Springer in 2011, Volume. 25(8)
“A Numerical Study on the Performance of a Sudden Expansion with Multisteps as a Diffuser” by D. K. Mandal, N. K. Manna, S. Bandyopadhyay, B.P.Biswas and S. Chakrabarti , International Journal of Applied Mechanics in 2011, Volume 3(4)
“A numerical study on the flow through a plane symmetric sudden expansion with a fence viewed as a diffuser” by D. K. Mandal, S. Bandyopadhyay, and S. Chakrabarti , International Journal of Engineering, Science and Technology in 2011, Volume 3(8)
Study on the Effect of Steady, Simple pulsatile and Physiological Pulsatile Flows Through A Stenosed Artery by P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti , Heat and and Mas Transfer, Springer in 2014, Vol 50
Mass deposition and fluid flow in stenotic arteries: Rectangular and Half-circular models by D. K. Mandal and S. Chakrabarti , Journal of Biomedical Science and Engineering(JBiSE) in Vol.6 No.12 2013
A numerical investigation of fluid flow through a sudden expansion by S. Kumar, S. Chakrabarti, D. K. Mandal and S Majumdar , Journal of Energy Heat and Mass Transfer in 2014,Volume 36
Wall Shear Stress Characteristics for the Progression of the Disease, Atherosclerosis by P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti , J. Inst. Eng. India Ser. C in 2015, Vol 96(3)
Analysis of Steady and Physiological Pulsatile Flow Characteristics in an Artery with Various Percentages of Restrictions by P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti , International Journal for Fluid Mechanics Research in 2015 Vol 42 (3)
Effects of Hemodynamic Parameters and involved Processes on Mass Transport through Arterial Wall for Localization and Progression of the Disease, Atherosclerosis: A Review by Somnath Santra, Dipak Kr Mandal and Somnath Chakrabarti , International Journal of Transport Phenomena in 2016, Volume 14, Number 3
Numerical investigation of heat transfer under Impinging annular jets by Tarun Kanti Pal, Himadri Chattopadhyay, Dipak Kumar Mandal and Suvanjan Bhattacharyya , Matter:International Journal of Science and Technology in 2016, Volume 2 Issue 1
ANALYSIS OF WALL SHEAR PARAMETERS OF PHYSIOLOGICAL PULSATILE FLOW THROUGH MILD AND SEVERE ARTERIAL STENOSIS AND CORRELATION TO ATHEROSCLEROSIS by P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti , MATTER: International Journal of Science and Technology in 2016, Volume 2 Issue 3,
Effect of Hypertension and Hyperlipidemia on LDL Transport in Arterial Layers for Newtonian and non-Newtonian Aspects of Blood by Somnath Santra, Dipak Kumar Mandal and Somnath Chakrabarti , International Journal of Transport Phenomena in Volume 14, Number 4 2017
Assessment of Accumulation Rate of LDL Species in Arterial Wall layers under Hypertension and Hyperlipidemia Conditions by Somnath Santra, Dipak Mandal and Somnath Chakrabarti , International Journal for Fluid Mechanics Research in 2017,Volume 44(1)
Effect of pulsatile blood flow on LDL transport in arterial layers by Somnath Santra, Dipak Mandal and Somnath Chakrabarti , Progress in Computational Fluid Dynamics in Vol. 18, No. 3, 2018
Estimation of Effective Length along with Flow and Pressure Characteristic Analyses of a Sudden Expansion Diffuser and a Hybrid Diffuser by A. Guha, D. K. Mandal, N. K. Manna and S. Chakrabarti , International Journal for Fluid Mechanics Research in Vol. 45, No. 5, 2018
Flow and Heat Transfer due to Impinging Annular Jet by Tarun Kanti Pal, Himadri Chattopadhyay, Dipak Kumar Mandal , International Journal for Fluid Mechanics Research in Vol 46 No 3, 2019
A New Approach for Assessing the LDL Species in Arterial Wall Layers by Somnath Santra, Dipak Mandal and Somnath Chakrabarti , J. Inst. Eng. India Ser. C in Vol. 101(1):13–24, 2020
Numerical investigations of various aspects of plaque deposition through constricted artery by P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti , Journal of Mechanical Engineering and Sciences in Volume 13, Issue 3, 2019
Pressure characteristic analysis and estimation of effective length of a hybrid diffuser and modified hybrid diffusers from A. Guha, D. K. Mandal, N. K. Manna and S. Chakrabarti International Conference on Mechanical, Materials and Renewable Energy, Sikkim Manipal Institute of Technology in 2018
Investigation of low and oscillatory wall shear stress in realistic pulsatile flow through stenosed artery from P. Goswami, D.K. Mandal, N.K. Manna and S. Chakrabarti INCOM18: Proceedings of the 1st International Conference on Mechanical Engineering Jadavpur University Kolkata India in 2018
Effect of hyperlipidemia and hy-perthermia on ldl species transportation in arterial wall layers from S. Santra, D. K. Mandal and S. Chakrabarti INCOM18: Proceedings of the 1st International Conference on Mechanical Engineering Jadavpur University Kolkata India in January 4 – 6, 2018 Paper No. INCOM18-024, pages
Study on Flow Characteristics of Fluid passing through a Configuration of Plain Sudden Expansion Followed by Diverging Section–Viewed as a Diffuser from A. Guha, D.K. Mandal, N.K. Manna and S. Chakrabarti 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in 2-4th Jan 2015
Computational Study of Heat Transfer under Impinging Annular Jets from Tarun Kanti Pal, Himadri Chattopadhyay and Dipak Kumar Mandal 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in 2-4th Jan 2015
Fluid Dynamics Study of Physiological Pulsatile Flow through Stenosed Artery from P. Goswami, D.K. Mandal, N.K. Mann and S. Chakrabarti 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in 2-4th Jan 2015
Mathematical Modelling of Mass Transport through Arterial Wall on the Perspective of the Disease, Atherosclerosis: A Review from S. Santra, D.K. Mandal and S. Chakrabarti 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in 2-4th Jan 2015
Study on Flow Characteristics of Fluid passing through a Configuration of Plain Sudden Expansion Followed by Diverging Section–Viewed as a Diffuser from A. Guha, D.K. Mandal, N.K. Manna and S. Chakrabarti 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015) in 2010, Vol 20(6),
Computational Study of Heat Transfer under Impinging Annular Jets from Tarun Kanti Pal, Himadri Chattopadhyay and Dipak Kumar Mandal 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015)
Fluid Dynamics Study of Physiological Pulsatile Flow through Stenosed Artery from P. Goswami, D.K. Mandal, N.K. Mann and S. Chakrabarti 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015)
Mathematical Modelling of Mass Transport through Arterial Wall on the Perspective of the Disease, Atherosclerosis: A Review from S. Santra, D.K. Mandal and S. Chakrabarti 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2015)
Design and Development of a Low Cost Automation Injection Molding Machine of 250 g Capacity Using Microcontroller from Soumya Kanti Manna, Saibal Kumar Pradhan and Dipak Kumar Mandal 28th International Conference on CADCAM, Robotics and Factories of the Future 2016 (CARs & FoF 2016)
Transport phenomena under impinging annular jets from Tarun Kanti Pal, Himadri Chattopadhyay, Dipak Kumar Mandal 5th International and 41st National Conference on Fluid Mechanics and Fluid Power (FMFP – 2014)
Analysis of Wall Shear Parameters of Physiological Pulsatile Flow through Mild and Severe Arterial Stenosis and Correlation to Atherosclerosis from Partha Goswami, Dipak Kumar Mandal, Nirmal Kumar Manna, Somnath Chakrabarty. 3rd International Conference on Researches in Science and Technology (ICRST), at Nanyang Technological University, Nanyang Executive Centre, Singapore.
Numerical Investigation of Heat Transfer under Impinging Annular Jets from Tarun Kanti Pal, Himadri Chattopadhyay, Dipak Kumar Mandal and Suvanjan Bhattacharyya, 3rd International Conference on Researches in Science and Technology (ICRST), at Nanyang Technological University, Nanyang Executive Centre, Singapore.
A numerical study on the variation of static pressures of blood near the stenosis of coronary artery from S. Chakrabarti, D. Mondal and D. K. Mandal International Conference on Mechanical Engineering 2005(ICME2005), Dhaka, Bangladesh in 28-30 December 2005
Study on the impact of percentage of stenosis on wall pressure in a stenotic coronary artery from D. K. Mandal and S. Chakrabarti 2nd International Conference “From Scientific Computing to Computational Engineering, Athens Bangladesh in 5-8 July, 2006
Study on the variation of wall pressure of blood near the stenosis of a coronary artery from D. K. Mandal and S. Chakrabarti 2nd International Congress on Computational Mechanics and Simulation (ICCMS-06), IIT Guwahati in 8-10 December 2006
Effect of different shaped stenoses on wall pressure drop at stenosis zone of a coronary from D. K. Mandal and S. Chakrabarti fifty-third congress of The Indian Society of Theoretical and Applied Mechanics (An international Meet) held in University College of Engg., Osmania University, Hyderabad, in 27-30 December 2008
Study of wall shear stress through a coronary artery with a trapezoidal shaped stenosis from S. Chakrabarti and D. K. Mandal fifty-third congress of The Indian Society of Theoretical and Applied Mechanics (An international Meet) held in University College of Engg., Osmania University, Hyderabad, in 27-30 December 2008
Study of wall shear stress through asymmetric double stenosed coronary artery from S. Chakrabarti and D. K. Mandal International Conference on Advances in Mechanical Engineering, (ICAME-2009), Surat, in August 3-5, 2009
A numerical study on wall shear stress and flow characteristics of blood flowing through coronary artery diseased with single asymmetric stenosis from S. Chakrabarti, D. K. Mandal and N. K. Manna International Conference on ‘Frontiers in Mechanical Engineering, FIME2010, National Institute of Technology Karnataka, Surathkal in May, 20-22, 2010
Numerical prediction of blood flow through asymmetric multistenosed artery from D. K. Mandal, N. K. Manna and S. Chakrabarti 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics IIT Kharagpur, India in December 27-29, 2010,
A numerical study on the effect of location of fence in a sudden expansion on its performance as a diffuser from S. Chakrabarti, D. K. Mandal and S. Rao 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics IIT Kharagpur, India in December 27-29, 2010
A Numerical Model Study of Steady and Pulsatile Flow through Symmetrical and Asymmetrical Bell Shaped Stenoses from D. K. Mandal, N. K. Manna and S. Chakrabarti International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011), SKP Engineering College, Tiruvannamalai-606 611 in December, 16-17,2011
A numerical study on the effect of suction on the performance of a Vortex Controlled Diffuser from S. Bandyopadhyay, D. K. Mandal and S. Chakrabarty International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011), SKP Engineering College, Tiruvannamalai-606 611, SKP Engineering College, Tiruvannamalai-606 611 in December, 16-17,2011
A Numerical Experimentation On The Performance Of A Sudden Expansion With Two Fences In Terms Of Static Pressure Rise When Viewed As A Diffuser from N. Banerjee, D.K Mandal and S. Chakrabarti International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011), SKP Engineering College, Tiruvannamalai-606 611 in December, 16-17,2011
Study on the Performance of a Condenser used in a 210MW Thermal Power Unit from A. Dutta ,D. K. Mandal ,A. K. Das and S. Chakrabarti International Conference on Design and Advances in Mechanical Engineering (ICDAAME-2011), SKP Engineering College, Tiruvannamalai-606 611 in December, 16-17,2011
Study on the variation of effectiveness, effective length of diffuser and stagnation pressure, with the configuration of a sudden expansion with two fences from S. Chakrabarti, D.K Mandal and N. Banerjee International Conference on Mechanical Engineering 2011 (ICME2011), Dhaka, Bangladesh in 18-20 December 2011,
Comparison of Steady, Simple pulsatile and Physiological Pulsatile Flow through Stenosed Artery from P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti International conference on Advances in Mechanical Engineering and its Interdisciplinary areas, CEMK, 2012 in 27-28 th December 2012.
Study on shear flow charecteristics in a stenosed human artery For initiation and progression of atherosclerosis from P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference 2013, organized by IIT Kharagpur, India in 28-31st December 2013
Study on shear flow charecteristics in a stenosed human artery for initiation and progression of atherosclerosis from P. Goswami, D. K. Mandal, N. K. Manna and S. Chakrabarti 58th Congress of ISTAM BESU, Kolkata, India. in 18th - 21st December, 2013
Study on flow characteristics of fluid passing through hybrid Diffuser with the help of streamline contours from A. Guha, D. K. Mandal, N. K. Manna and S. Chakrabarti 58th Congress of ISTAM BESU, Kolkata, India. in 18th - 21st December, 2013
Project Title: Modelling of mass transport through arterial wall during initiation and progression of stenosis Sponsor: AICTE Investigator (s): Co-principal investigator Amount: Rs 5,39000/- Duration: from 2010 to 2011 .
Project Title: Study of VCR engine performance for both Diesel and Petrol Engine. Sponsor: AICTE, MODROBS Investigator (s): AICTE, MODROBS Amount: Rs.1163375/- Duration: from 2013 to 2014 .
Project Title: DEVELOPMENT OF STUDENT SATELLITE TECHNOLOGY FOR AERIAL SURVEILLANCE Sponsor: Institution of Engineers( India) Investigator (s): D K ManadalAmount: 50000Duration: 2014.
Project Title: CAE SOLUTIONS TO STITCH 3D LINEAR SCANS INTO WHOLE OBJECTS FOR MOULD MAKING Sponsor: Institution of Engineers( India) Investigator (s): D K ManadalAmount: 30000Duration: 2015-16.
Project Title: CNC SOLUTIONS TO MAKE EVAPORATIBE THERMCOL PATTERNS Sponsor: Institution of Engineers( India) Investigator (s): D K ManadalAmount: 40000Duration: 2015-16.
Project Title: Indigenous clamp for medical and research lab applications Sponsor: Institution of Engineers( India) Investigator (s): Dr. Dipak Kumar MandalAmount: 50000Duration: April 2016, 6 months.
Project Title: DEVELOPMENT OF LOW COST SETUP OF ABRASIVE JET MACHINING FOR HARDER MATERIAL Sponsor: IEI Investigator (s): D K MandalAmount: 30000Duration: 6 months 2018.
Project Title: Study and performance analysis of CRDI VCR Engine Sponsor: Modrobs, AICTE Investigator (s): Dr Dipak Kumar MandalAmount: 12.25 lakhDuration: 2019-2021.
Project Title: Project ID: UG2020036: Development of Low Cost Solar Chimney Power Project (SCPP) Sponsor: Institution of Engineers( India) Investigator (s): Dk Mandal Amount: 30000Duration: 6 months 2020.
National Workshop on Basics of Computational Fluid Dynamics Organized by D K Mandalsponsored by Jointly sponsored by AICTE & DST during 11-13.1.2008.
National Workshop on CFD and it’s application in Bio-Fluid Dynamics (NWCBFD’12) Organized by D K Mandalsponsored by Jointly sponsored by AICTE, DST & DBT during 02.-04-01.2012.
International conference on Advances in Mechanical Engineering and its Interdisciplinary areas(ICAMEI2012) Organized by D K mandalsponsored by sponsored by DBT &AICTE during 27-28.12.12.
Faculty Development Programme” for research and Develpoement Organized by D K Mandalsponsored by under TEQIP-II during 02.02.2013.
Invited talk on on Thermodynamics and its applications Organized by D K Mandalsponsored by under TEQIP-II during 13-14.04.13.
Workshop on Outcome Based Education Organized by D K Mandalsponsored by under TEQIP-II during 21st May 2013.
Workshop on Aeromodelling and hands on Training Organized by D K Mandalsponsored by under TEQIP-II during 15-17.09.2013.
MATLAB Orientation programme Organized by D K Mandalsponsored by under TEQIP-II during 8-14.09.2013.
International workshop on Advances in Healthcare Engineering (IWAHE-14) Organized by D K Mandalsponsored by TEQIP-II and DBT during 2-4.1.2014.
2nd International conference on Advances in Mechanical Engineering and its Interdisciplinary areas(ICAMEI15) Organized by D K Mandalsponsored by DBT during 2-4.1.2015.
28th International Conference on CADCAM, Robotics and Factories of the Future 2016 (CARs & FoF 2016) Organized by D K Mandalsponsored by BRNS, SERB, RSI, IEI, GATEforum, TEQIP-II during 4-6.1.2016.
International Workshop on Thermo-Fluids Sciences : Analysis and applications Organized by D K Mandalsponsored by TEQIP-II, IEI(I) during 1-3.10.2016.
International workshop on Thermo-Fluids Sciences in Healthcare Engineering Organized by D K Mandalsponsored by DBT,IEI during 6-8th January 2018.
1.1.07
21.1.07
JadavpurUniversity
AcademicStaffCollege, UGC
Refresher course entitled “Special Topics in Fluid Mechanics”
<td valign="
8.6.09
27.6.09
Refresher course entitled “Frontiers in Power Engineering and Energy Sustainability”
29.12.09
31.12.09
IIT Kharagpur,IIEST, Shibpur,JUKolkata,IIT Roorkee,IIT Guwahati,IIT Kanpur,IIT Madras ,IIt Delhi,IIT Bombay,IIT Bhubaneswar,IISC Bangalore,BARC Mumbai,NIOH Kolkata,University of Pune,CMERI, Durgapur,NUS, Singapore,Cleveland State University, USA,Cranfied University, UK,University of Southampton,Massachusetts Institute of Technology,Texas A & m university,University of Florida,Northan Illunois University,Middlesex University, UK,Colombia and South Bank University, UK,Universitiy of West Indies,University of Bradford, UK
Engineering Mechanics, Engineering Graphics,Workshop, Engineering thermodynamics and Fluid Mechanics, Fluid Mechanics and Fluid Machines, Heat Transfer, Power Plant Engineering
Thermal Power Engineering, Computational Fluid Mechanics
MAJOR RECRUITERS
