IC Engine Lab &Thermal Power Engineering Lab
IC Engine Lab & Thermal Power Engineering Lab, Area:56.4 sq. m.
LIST OF EXPERIMENTS ON IC ENGINE LAB & THERMAL POWER ENGG. LAB
1. Study of Boiler Cut Models
2. Study of IC Engine Models
3. Valve timing Diagram: Draw the Valve timing Diagram of a Single cylinder 4S Diesel and Petrol Engines.
4. Load Test of a 4S Diesel Engine: To Study the Change in Fuel Consumption and Efficiency with Change in Loading with the help of Electrical Load Box, Draw also the Graphs of FC vs. BHP, BSFC vs. BHP, Efficiency vs. BHP.
5. Load Test on Single Cylinder 4 Stroke Petrol Engine by Rope Brake Dynamometer to Perform Load Test on a Petrol Engine and to Calculate ( i ) BHP , ( ii ) FHP ( iii ) IHP ( iv ) BSFC ( v ) Indicated Thermal Efficiency ( vi ) Brake Thermal efficiency ( vii ) Mechanical Efficiency ( viii ) Volumetric Efficiency
6. Load Test on Single Cylinder 4 Stroke Diesel Engine by Rope Brake Dynamometer to Perform Load Test on a Diesel Engine and to Calculate ( i ) BHP , ( ii ) FHP ( iii ) IHP ( iv ) BSFC ( v ) Indicated Thermal Efficiency ( vi ) Brake Thermal efficiency ( vii ) Mechanical Efficiency ( viii ) Volumetric Efficiency .
7. Heat Balance of 4 Stroke Diesel Engine by Rope Brake Dynamometer to Study the percentage losses that occur in Diesel Engine.
8. Performance Characteristics of Diesel Engine at Different rpm by Rope Brake Dynamometer : To Perform Load Test On a Diesel Engine and Calculate (i) Brake power, (ii) Fuel consumption, (iii) Air Consumption, (iv) Brake Thermal Efficiency (v) Volumetric Efficiency.
9. To find the Calorific Value of any fuel by Bomb Calorimeter.
10. To find out the Flash Point and Fire Point of Liquid fuel or Oil by means of Cleveland Apparatus.
11.To find out the Cloud and Pour Point of Liquid fuel
12. To study the Diesel Smoke meter.
13. To visit a Thermal Power Station.
Thermal Power Engineering Lab
LIST OF Equipments in THERMAL POWER ENGG. LAB
1.4 – Stroke 2-Cylinder Diesel Engine 14 BH.P. Make: Alimgir Completed with 3-Phase, 8-KVA, Pawertone make Alternator, Fuel Tank, Water Tank & Pump, Control Panel, Tachometer, etc.
2. 4-Stroke 4-Cylinder Petrol Engine 13 BH.P. Make: Ambassador Completed With Alternator all Spark Ignition system, Self Starter & Control Panel etc.
3. 4 Stroke single cylinder Diesel Engine with rope brake dynamometer,5hp 1500 rpm
4. 4 Stroke single cylinder Petrol Engine with rope brake dynamometer,3 hp, 3600 rpm
5. 4 stroke diesel Engine for valve timing diagram.
6. 2 Stroke Petrol Engine for valve timing diagram
7. 4 Stroke Petrol Engine for valve timing diagram
8. 4 Stroke/ 4 Cylinder/water cooled 10 HP/1500 RPM/Vertical Petrol Engine Test rig/With Morse Test facility
9. Cut Models (Boiler): a)Cochran Boiler b)Vertical Water Tube Boiler c)Babcock & Wilcox Boiler d)Lancashire Boiler e) Locomotive Boiler
10. To find out the Flash Point and Fire Point of Liquid fuel or Oil by means of Cleveland Apparatus.
11.Cut Models (Automobile): a) Two stroke Petrol Engine b) Four stroke Petrol Engine c) Four stroke diesel Engine d) Gear Box e) Gear Box with Clutch f) Differential Gear Assembly g) Demo of Differential Gear
12. Smoke meter.
13. Bomb Calorimeter
14. Pour & Cloud Point Appts.
15. Flash & Fire Point Appts.
Total Cost: 10,79,481
Engineering Graphics Lab
Engineering Graphics Lab
Area = 123.24 Sq. Mts.
LIST OF DRAWING SHEETS & ASSIGNMENTS (ME-191)
Sheet No 1:Line, Lettering And Dimensioning
Sheet No 2: Curves
Sheet No 3: Scales
Sheet No 4:Projection Of Points And Lines
Sheet No 5: Projection Of Planes
Sheet No 6: Projection Of Solids
LIST OF DRAWING SHEETS & ASSIGNMENTS (ME-291)
Sheet No 1: Isometric Projection
Sheet No 2: Section Of Solids
Sheet No 3: Development Of Surfaces
Sheet No 4: Interpenetration Of Surfaces
Sheet No 5: Machine Drawing
Sheet No 6: Riveted Joints, Nut And Bolt
Sheet No 7: Auto-Cad
Applied Mech
Area = 90.06 Sq. Mts.
Applied Mechanics Lab, ME 393
Analog UTM of capacity 20 Ton
2.Mechanical Extensometer
3.Torsion Testing Machine of capacity 60 Nm
4.Brinell & Rockwell Hardness Machine
5.Spring Testing Machine
6.Strain Gauge Trainer Kit
7.Coefficient of friction measurement set up
8.Set up for measurement of speed ratio
Total Cost: Rs. 7,20,925
Material testing Lab,ME493
Impact Testing Machine (Izod & Charpy)
Erichson cupping tester
Fatigue Testing Machine
Total Cost: Rs.1,83,300
Fluid Mechanics
Fluid Mechanics
| Name of The Laboratory | Area (Sq. m) | Major Equipments |
|---|
| Fluid Mechanics & Hydraulics Laboratory ME 491 |
99.34 |
i. CLOSED CIRCUIT APPARATUS FOR DETERMINATION OF MINOR LOSSES IN PIPE LINES DUE TO AN ELBOW, BEND, SUDDEN EXPANISION & CONTRACTION
ii. CLOSED CIRCUIT APPARATUS FOR MEASURING FRICTIONAL LOSSES IN PIPE LINES
iii. CLOSED CIRCUIT APPARATUS FOR DETERMINATION OF FLOW THROUGH VENTURIMETER & ORIFICEMETER
iv. CLOSED CIRCUIT APPARATUS FOR DETERMINATION OF CO-EFFICIENT OF DISCHARGE OF NOTCHES & WEIRS
v. CLOSE CIRCUIT JET ON VANE APPARATUS
vi. CLOSED CIRCUIT RECIPROCATING PUMP TEST RIG
vii. CLOSED CIRCUIT SINGLE STAGE MULTISPEED CENTRIFUGAL PUMP TEST RIG
viii. CLOSE CIRCUIT REYNOLDS APPARATUS : ( FLOW VISUALISATION APPTS.)
ix. CLOSED CIRCUIT BERNOULLIS THEOREM APPARATUS
x. CLOSE CIRCUIT 2 H P PELTON T URBINE T EST RIG
xi. CLOSE CIRCUIT 2 HP Francis TURBINE TEST RIG
xii)Pitot tube apparatus
Total Cost: Rs. 6,63,105 ]
|
CAD/CAM Lab
CAD Lab
| Name of The Laboratory | Area (Sq. m) | Major Equipments |
|---|
| Auto-CAD Laboratory |
51.66 |
1. 30 Nos. of PC
2. Latest Auto-CAD Software
3. LCD Projector
4. Laser jet Printer |
ACTIVITIES OF CAD/CAM LAB:
i. Computer Aided drafting problems to solve using dimension and geometrical tolerancing , surface modules and representation.
ii. Problems of two and three dimensional models. Solid modeling based applications by Auto CAD and CATIA software.
Machine Shop
Machine Shop. Area: 74.73 Sq. Mts.
Major Machines In The Shop
Lathe (4.5’) with all accessories- 8 Nos.
Shaping Machine with all accessories- 4 Nos.
Universal Milling Machine (Horizontal)with accessories- 1 No.
Universal Milling Machine (Vertical) with accessories- 1No
Drilling Machine- 1No.
Bench Grinder- 1No.
CNC Lathe (MTAB)- 1No.
Different Machine Shop Equipments.
Color charts for different Machines
ACTIVITIES OF MACHINE SHOP:
WORKSHOP PRACTICAL NAME OF EXPERIMENTS
MANUFACTURING A JOB BY LATHE
MANUFACTURING A JOB BY SHAPER.
MANUFACTURING A JOB BY MILLING.
Carpentry Shop
Carpentry Shop. Area: 43.2 Sq. Mts.
Major Equipments In The Shop
Belt & Disc Sander: Capacity 48”x6”- 1 No
Vertical Band Saw, W.D.12”, Size of Table 17.75”x17.75”- 1No.
Circular Saw ( Wood Cutting): SD-12” Table size 22”x 22”- 1 No.
Bench Surface Planner: Capacity-6”- 1 No.
Carpentry Vice- 14 Nos
Different types of Carpentry hand tools like Saws, Chisels, Mallets, Planners, Files & different Marking & Measuring tools etc
Wood Working Lathe- 1No.
ACTIVITIES OF CARPENTRY SHOP:
WORKSHOP PRACTICAL NAME OF EXPERIMENTS:
MAKING THE CROSS- HALVING JOINT.
MAKING THE TEE - BRIDLE JOINT.
MAKING THE DOVE-TAIL JOINT.
Fitting Shop
Fitting Shop. Area:43.2 Sq. Mts.
Major Equipments In The Shop
Piller Drill Machine: Capacity-3/4”- 3 Nos.
Double Ended Bench Grinder GHD-6”- 3 Nos.
Semi Hydraulic Hacksaw: 1HP/AC/3Ph/1440rpm. – 1 No.
Fitting Vice- 14 Nos.
Different types of fitting tools like Hacksaw, Files, Chisels, Hammer, Punch, Taps, Dies & different types of Marking & Measuring tools etc.
Measuring Instruments: Vernier Caliper, Height Gauge, Micrometer Inside/ Outside, angle gauge Bevel Protector etc.
ACTIVITIES OF FITTING SHOP & MEASURING INSTRUMENTS:
WORKSHOP PRACTICAL
MAKING A PATTERN ON METAL PLATE
To Measure an External Diameter of a given sample by Outside Caliper, Vernier Caliper and Outside Micrometer
To Measure an Internal Diameter of a given sample by Inside Caliper, Vernier Caliper and Inside Micrometer.
To Measure the Height and Inclination with Horizontal of a given sample by Height Gauge and Angle Gauge Bevel Protector.
WELDING SHOP
Welding Shop. Area: 42.72 Sq. Mts.
Major Equipments In The Shop
MMA Welding Transformer Set 1Ph,440V,AC, 200Amps.- 4 Nos.
Spot Welding Machine- 1 No
Gas Welding & Gas Cutting Set (Including Torches, Regulators, Nozzles and Hoses etc.)- 4. 2 Set.
Brazing Set with accessories- 1 Set.
CO2 MIG Welding Machine
ACTIVITIES OF WELDING SHOP:WORKSHOP PRACTICAL
Name of Practical
MAKING A PATTERN ON METAL PLATE
MAKING A LAP JOINT BY GAS WELDING
BUTT JOINT BY MMA WELDING
JOIN TWO METAL PLATES BY SPOT WELDING
SHEET METAL SHOP
Sheet Metal Shop.Area: 72.48 Sq.Mtr
Major Laboratories in the department
Hand Shearing Machine, Size-12”- 1 No.
Eccentric Press- Pressure Capacity- 2 Ton. – 1No.
Circle Cutting M/c Size24”- 1 No.
Top & Bottom Seaming M/c- Max. Dia.8”, Max. Height 10”- 1 No.
Sheet Rolling M/c. - 1No
Edge Folding M/c. – 1No
Anvil With 5 Stake Set- 3 Sets
Soldering Equipments- 2 Sets
ACTIVITIES OF SHEET METAL SHOP: WORKSHOP PRACTICAL
NAME OF EXPERIMENTS:
MAKING A RECTANGULAR TRAY BY TIN SMITHY & SOLDERING.
MAKING A FUNNEL BY TIN SMITHY & SOLDERING.
Foundry Shop
Foundry Shop.Area: 78.96 Sq. Mts.
Major Equipments in the Shop
Muffle Furnace
Different types of Foundry tools.
Different types of wooden patterns.
Different Sand Testing Machines.
ACTIVITIES OF FOUNDRY SHOP:WORKSHOP PRACTICAL
NAME OF EXPERIMENTS:
Making a wooden pattern .
Making of Sand Moulding and Casting.
Making of core.
Sand Testing.
Forging Shop
Forging Shop
Area: 78.96 Sq. Mts.
Major Equipments In This Shop
Smithy Hearth Furnace – 2Nos.
Different types of Forging tools.
ACTIVITIES OF FORGING SHOP:WORKSHOP PRACTICAL
NAME OF EXPERIMENTS:
Making a job by Drawing Down & Upsetting process.
Making a job by Forge Welding Process
Practicing forging of Carbon steel and testing of its properties changes.
Applied Thermodynamics & Heat Transfer Lab
List of Equipments in Applied Thermodynamics & Heat Transfer Lab, ME 592 Area = Sq. Mts. 1 HEAT TRANSFER IN FORCED CONVECTION : 1 No, 2 HEAT TRANSFER IN NATURAL CONVECTION: 1 No, 3 STEFAN BOLTZMAN APPARATUS : 1 No, 4 EMMISSIVITY MEASUREMENT APPTS. 1 No, 5 PERFORMANCE TEST ON AIR CONDITIONING TEST RIG : 1 No, 6 DETERMINATION OF C.O.P. OF VAPOUR COMPRESSION CYCLE ( REFRIGERATION TEST RIG ) 1 No, 7 PARALLEL FLOW / COUNTER FLOW HEAT EXCHANGER: 1 No, 8 THERMAL CONDUCTIVITY OF LIQUIDS : 1 No, 9 THERMAL CONDUCTIVITY OF METAL BAR 1 No, 10 COOLING TOWER TEST RIG : 1No, Total cost:4,53,500
Metrology and Measurement Lab
List of Equipment & Quantity for Metrology & Measurement Lab, ME594. Area = 32.4 Sq. Mts. 1 Outside Micrometer 0-25 mm, (Mitutoyo) 2 Nos, 2 Outside Micrometer 25-50 mm, (Mitutoyo) 2 Nos, 3 Vernier Caliper 300 mm, (Mitutoyo) 2 Nos, 4 Slip Gauge Set, (Mitutoyo) 1 No, 5 Gear Tooth Micrometer, (Mitutoyo) 1 No, 6 Disk Micrometer 0-25 mm, (Mitutoyo) 1 No, 7 Bevel Protracter 150 X 300, (Mitutoyo) 1 NO, 8 Digimatic Outside Micrometer 0-25 mm, (Mitutoyo) 1 NO, 9 Dial Indicator LC .01 Range +/-0-100mm with Magnatic Stand, (Mitutoyo) 4 Nos, 10 Screw Thread Micrometer ,(Mitutoyo) 1No, 11 Profile Projector ,(Mitutoyo) 1No, 12 Surface Roughness Tester SJ210 –Standard Set with Connecting cable,(Mitutoyo) 1No, 13 Granite Surface plate 600X600X130,(Mitutoyo) 1No, Total Cost: 5,39,700
Dynamics of Machine lab
Area: Equipments: 1 STATIC AND DYNAMIC BALANCING APPARATUS (Balancing Of Revolving Masses Apparatus) 1 No, 2 UNIVERSAL GOVERNOR APPARATUS 1 No, 3 MOTORISED GYROSCOPE 1 No, 4 CAM ANALYSIS APPARATUS 1 No, 5 BALANCING OF RECIPROCATING MASSES APPARATUS 1 No, 6 UNIVERSAL VIBRATION APPARATUS 1 No, Total Cost:` 7, 94 ,000
CFD and Research lab
ANSYS software for 5 users
3D printer
Rapid prototyping machine
Vickers microhardness tester
Olympus microscope
Robotics Lab
5 axis robot, MTAB